tcsd tmm .26" (6,6mm) tcsd?08?d?02.00?01?n?r www.samtec.com mates with: tmm, tmmh, stmm, mmt, tw, mtmm, eht, etmm (-sr), zstmm type strip 2 mm tiger eye ? idc cable ? low pro? le, only 5mm (.200") assembled height ? four-? nger contacts optimize normal, insertion and withdrawal forces ? ask about our custom idc design capabilities no. pins per row end op tion ??xx.xx? = assembled length other option ?f = gold ? ash on contact assembled length in inches ( 1 / 8 ") 2 inches minimum leave blank for standard plating: 30"(0,76m) gold on contact area ?05, ?08, ?10, ?12, ?13, ?15, ?17, ?20, ?22, ?25 (call for other sizes) 01 plating option n length note: tcsd series assemblies are non- standard, non-returnable. ?s = single end ?d = double end (2,00) .0787 (2,00) .0787 no. of positions x (2,00) .0787 + (4,00) .157 (5,08) .200 (1,00) .039 (4,00) .158 01 (3,17) .125 (1,02) .040 ?n = notch polarization f-209-1 for complete speci? cations see www.samtec.com?tcsd insulator ma te ri al: black glass filled polyester contact: becu plating: au or sn over 50" (1,27m) ni wire: 28 awg 7/36 stranded, tinned, copper with gray pvc insulator current rating: 1a operating temp range: -40c to +105c lead size accepted: (0,48mm) .019" to (0,53mm) .021" contact re sis tance: 10 m maximum insertion depth: (2,87mm) .113" to (3,17mm) .125" insertion force: (single contact only) 2 oz. (0,56n) average withdrawal force: (single contact only) 1.4 oz (0,39n) average rohs compliant: ye s ejector header see eht series. polarizing key specify pk-01-07 for polarizing key (available in wheels of six each). also polarizes smm series socket strips. tcsd = socket strip tcsd series ?o = outside reverse 4 5 5 requires ?dxx 5 requires ?dxx 3 ?p ?xx? = position po lar iza tion ?rw = reverse wiring 1 not available with ?o, ?m, ?r, ?dxx or ?bxx blue or black wire opposite position #1. 2 ?b ?xx? = breakout ?m = middle reverse ?r = reversed ?sr = strain relief ?d ?xx? = daisy chain no. of positions x (2,00) .0787 + (7,874) .3100 specify ?xx? as position number. same position will be polarized on both ends. 01 02 ?xx? 5"max. 2"min. specify ?xx? as number of conductors to be broken out. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. 2" min. 4" minimum ?xx? 1/8" double row con nec tors outer most (end of as sem bly) 01 02 features specifications note: other gold plating options available. contact samtec.
|
